24V 120W Industrial/Commercial Sliding Gate Drive, 230Vac 10A powered with a 316 stainless-steel cover, inbuilt control unit in an ABS plastic enclosure with clear lid.
Ground track gates running near level to 8m and free rolling Cantilever gates up to 600kgs
For intensive use
Duty cycle - 100% when connected to 230V ac power source.
Input power - 230V ac or low voltage including Solar
Fully adjustable ramp up, ramp down.
Battery back-up - 2 x 12V 2.3 Ah batteries
Opening/closing speed - variable up to 230mm/sec
Battery back-up - 2 x 12V 2.3 Ah batteries
Cast-iron gearbox
Hot-dipped galvanised chassis
Technical features
SGD600/8-24
Power supply (to control unit)
230 V ac (50 Hz)
Motor power supply
24 V dc
Motor power
120 W dc
Max. gate leaf length
8m approx.
Max. gate leaf height
2m approx.
Max. operating weight
up to 600 kg
Opening / closing speed
230mm/sec
Duty cycle
100 %
Control Board
ELSEMA / CB-6 depending on application
Pinion module
Module 4
An installed system can include the following:
BS-400T
Barrier-Curtain Sensor, 4 Infrared Through Beam Photocell, 10-30V dc relay output. For gate openings up to 7 m.
900OPTIC
2 x Sets of surface-mounted 12/24V ac/dc Infrared Safety Photocells, beam alignment adjustable up to 15º, 20 m range.
400CFZ22
Sliding Gate Galvanised Iron Rack, 22 x 22mm with brackets and screws. 2 metre lengths. (Module 4, Max. weight 3000 kg)
ULD913/ULD923
SensAble Sensors 12/24V, Single or Dual Channel vehicle inductive Loop Detector with base.
ULD911/ULD921
SensAble Sensors 230V, Single or Dual Channel vehicle inductive Loop Detector with base. Directional Control logic capable.
PLEASE NOTE: Safety First
The specifications and suggested gate sizes will vary depending upon other variables such as friction of wheels, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.
MAINTENANCE: To keep your Automated Gate running smoothly READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.
SGD600/8-24 24V High Speed Sliding Gate Drive
24V 120W Industrial/Commercial Sliding Gate Drive, 230Vac 10A powered with a 316 stainless-steel cover, inbuilt control unit in an ABS plastic enclosure with clear lid.An installed system can include the following:
PLEASE NOTE: Safety First
The specifications and suggested gate sizes will vary depending upon other variables such as friction of wheels, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.
MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.
> Download PDF