Our Products
650ARM270BENC

TAU 650ARM270BI 18V LINEAR SWING GATE DRIVE

TAU 650ARM270BI 18V LINEAR SWING GATE DRIVE
larger imageMove mouse over the image to magnify
Enquire

TAU 650ARM270BI 18V Linear Swing Gate Drive

TAU S.r.l. 18Vdc electromechanical Linear Swing Gate Drive with projecting stem, manual override, adjustable mounting bracket, and encoder. For open bar style gate leaf up to 5 metres.
 
  • Residential / apartment building / light commercial use 
  • Optical encoder technology
  • Fast operating speed, approximate opening time 13 sec/90°
  • Intensive use - 100% duty cycle when connected to 230Vac power source
  • Multi-position adjustable mounting bracket

Controlled by the D749MA Diamond series auto-adaptive algorithm Control Unit with the following features
 
  • Built-in 3 channel 433.92 Mhz rolling-code radio receiver
  • Built-in battery charger for power outage back-up battery operation
  • Electronic obstacle detection and crush prevention. EN 12445-12453 standards
  • Soft start and soft stop
  • Multi coloured diagnostic LEDs
  • Off Grid Solar Charge capable thanks to Photovoltaic (PV) Technology
 

Made in Italy Logo

Technical features 650ARM270BI
Power supply (to control unit) 230 V AC (50 - 60 Hz)
Motor power supply 18 V DC
Absorption 1.3 A
Absorbed power 24 W
Opening time 90° 13 sec.
Duty cycle 100 %
Max. thrust 2600 N
Operating temperature -20° C ÷ +55° C
Degree of protection IP 44

EN12445 Compliant 50

PLEASE NOTE: Safety First

All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.

The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW >
to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 
> Downloads
ARM270 Data Sheet 650ARM270 Series.pdf
ARM Series Gate Drive Video ARM Series Video of Construction
ARM200 Series Manual Release Instructions ARM200 End-User Manual.pdf
ARM Series Manual Release Video ARM Series Manual Release Video
D749MA Control Unit TAU 750D749MA.pdf

You might also be interested in ...

TAU 900TOWERF 49cm PHOTOCELL MOUNTING POST

TAU 900TOWERF 49cm PHOTOCELL MOUNTING POST

TAU S.r.l. Photocell Standard Mounting Post, painted aluminium, 49 cm high with counter plate.
COMBI ARIALDO 382-G GATE STOP / bolt down

COMBI ARIALDO 382-G GATE STOP / bolt down

COMBI ARIALDO Sliding Gate Stop, (large, flat) bolt down, zinc plated.