The driving force behind your gate. Click on the links below to find more about Swing Gate Drives supplied by Gate Drive Solutions. Small Swing Gate Drives Medium Swing Gate Drives Large Swing Gate Drives

Automatic electromechanical Swing Gate Systems for vehicle and pedestrian swing gates with a gate leaf (open bar style) length of up to 5 metres.

The gate leaf can be a single or dual swing gate, opening inward or outward depending on the site requirements and automated with either an above ground linear or articulated arms or in-ground swing gate system.

The TAU ARM Series Linear swing gate drives are designed for swing gates up to 5 metres wide.
The aesthetic appearance of the low profile design of the ARM Series Linear swing gate drives with the in-line construction of the motor, gearbox and projecting stem, allows it to blend in as unobtrusively as possible with the design of the gate.
 
The TAU EASY or ZIP Series Articulated Arm swing gate openers can be used for gates with extremely large pillars/posts

The TAU R18BENC AND R40 Series In-ground swing gate operators are virtually invisible and do not affect the visual appeal of the gate design. The R18BENC is capable of opening up to 360 degrees and an optional Opening Kit allows the R40 gate leaf swing to open up to 180 degrees if required.

TAU Swing Gate Drive Systems:
12V dc. Linear, Articulated Arm and In-ground operators
230V ac. Linear, and Articulated Arm

•  Opening times from 12.5 sec/90° to 30 sec/90°
•  Battery Back-up in the event of a power failure on 12V dc systems
•  Manual release in the event of power failure, all models