TAU S.r.l. 18Vdc electromechanical Linear Swing Gate Drive with projecting stem, manual override, adjustable mounting bracket, and encoder. For open bar style gate leaf up to 5 metres.
Residential / apartment building / light commercial use
Optical encoder technology
Fast operating speed, approximate opening time 13 sec/90°
Intensive use - 100% duty cycle when connected to 230Vac power source
Multi-position adjustable mounting bracket
Controlled by the D749MA Diamond series auto-adaptive algorithm Control Unit with the following features
Built-in 3 channel 433.92 Mhz rolling-code radio receiver
Built-in battery charger for power outage back-up battery operation
Electronic obstacle detection and crush prevention. EN 12445-12453 standards
Soft start and soft stop
Multi coloured diagnostic LEDs
Off Grid Solar Charge capable thanks to Photovoltaic (PV) Technology
Technical features
650ARM270BI
Power supply (to control unit)
230 V AC (50 - 60 Hz)
Motor power supply
18 V DC
Absorption
1.3 A
Absorbed power
24 W
Opening time
90° 13 sec.
Duty cycle
100 %
Max. thrust
2600 N
Operating temperature
-20° C ÷ +55° C
Degree of protection
IP 44
PLEASE NOTE: Safety First
All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.
The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.
MAINTENANCE: To keep your Automated Gate running smoothly READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.
TAU 650ARM270BI 18V Linear Swing Gate Drive
TAU S.r.l. 18Vdc electromechanical Linear Swing Gate Drive with projecting stem, manual override, adjustable mounting bracket, and encoder. For open bar style gate leaf up to 5 metres.Controlled by the D749MA Diamond series auto-adaptive algorithm Control Unit with the following features
PLEASE NOTE: Safety First
All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.
The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.
MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.
> Downloads