Our Products
650R40

TAU 650R40 18V IN-GROUND AUTOMATIC SWING GATE DRIVE

TAU 650R40 18V IN-GROUND AUTOMATIC SWING GATE DRIVE
larger imageMove mouse over the image to magnify
Enquire

TAU 650R40 18V In-Ground Swing Gate Drive

TAU S.r.l. 18Vdc electromechanical Inground Gearmotor Swing Gate Drive with encoder. For open bar gate leaf up to 3.5m/400kg.
 
  • Residential / apartment building / light commercial use 
  • Virtually invisible, does not affect the design of the gate
  • Intensive use - 100% duty cycle when connected to 230Vac power source
  • Operating speed, approximate opening time 18 sec/90°
  • Optical encoder technology
  • Protection degree IP67
  • Foundation Box with release system (ordered separately)
  • 700KIT180 Kit allows up to 180° opening (ordered separately)

Controlled by the D749MA Diamond series auto-adaptive algorithm Control Unit with the following features
 
  • Built-in 3 channel 433.92 Mhz rolling-code radio receiver
  • Built-in battery charger for power outage back-up battery operation
  • Electronic obstacle detection and crush prevention. EN 12445-12453 standards
  • Soft start and soft stop
  • Multi coloured diagnostic LEDs
  • Off Grid Solar Charge capable thanks to Photovoltaic (PV) Technology
 

Made in Italy Logo

Technical features 650R40
Power supply (to control unit) 230 V AC (50 - 60 Hz)
Motor power supply 18 V DC
Absorption 1.5 A
Absorbed power 28 W
Opening time 90° 18 sec.
Duty cycle 100 %
Max. torque 458 Nm
Operating temperature -20° C ÷ +55° C
Degree of protection IP 67

EN12445 Compliant 50

PLEASE NOTE: Safety First

All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.

The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW >
to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 
> Download PDF Acrobat Reader Logo-487
R40 Data Sheet 650R40.pdf
R40 Video of Unit R40 Video of Construction
R40 Manual Release R40 End-user Manual.pdf
Control Unit TAU 750D749MA.pdf

You might also be interested in ...

TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU S.r.l. Set of infrared safety photocells, 12/24V, surface mount, beam alignment adjustable up to 15°, up to 20m range
COMBI ARIALDO 345-R BEARING HINGE / adjustable

COMBI ARIALDO 345-R BEARING HINGE / adjustable

COMBI ARIALDO Swing Gate Hinge, large adjustable with screws and bearing, zinc plated.
COMBI ARIALDO 346-G BOTTOM PIVOT PLATE / with thrust bearing

COMBI ARIALDO 346-G BOTTOM PIVOT PLATE / with thrust bearing

COMBI ARIALDO Swing Gate large Bottom Pivot Plate with thrust bearing and grease cup, zinc plated.
TAU 250K-SLIMRP 2 CH ROLLING-CODE TRANSMITTER

TAU 250K-SLIMRP 2 CH ROLLING-CODE TRANSMITTER

TAU S.r.l. Two-channel transmitter, rolling-code technology, 433,92 MHz
TAU 250T-4RP 4 CH ROLLING-CODE TRANSMITTER

TAU 250T-4RP 4 CH ROLLING-CODE TRANSMITTER

TAU S.r.l. Four-channel transmitter, rolling-code technology, 433,92 MHz, complete with support
TAU 900TOWERF 49cm PHOTOCELL MOUNTING POST

TAU 900TOWERF 49cm PHOTOCELL MOUNTING POST

TAU S.r.l. Photocell Standard Mounting Post, painted aluminium, 49 cm high with counter plate.
COMBI ARIALDO 382-G GATE STOP / bolt down

COMBI ARIALDO 382-G GATE STOP / bolt down

COMBI ARIALDO Sliding Gate Stop, (large, flat) bolt down, zinc plated.